On-chip biomimetic filtration enabled by direct membrane micro-3D printing
MacLeod, M., Arp, HPH, Tekman, MB, and Jahnke, A. The global threat of plastic pollution. Science 373(6550), 61–65 (2021).
Gallowaya, TS & Lewisa, CN Marine microplastics pose big problems for future generations. proc. Natl. Acad. Science. UNITED STATES 1132331-2333 (2016).
Obotey Ezugbe, E. & Rathilal, S. Membrane technologies in wastewater treatment: a review. Membranes (Basel). ten89 (2020).
Tanudjaja, HJ, Hejase, CA, Tarabara, VV, Fane, AG & Chew, JW Membrane-based separation for oily wastewater: a practical perspective. Water Res. 156347–365 (2019).
Gebreslase, GA Review on membranes for the filtration of aqueous solutions: oil-in-water emulsion. J. Member. Science. Technology. 08(2018).
Lenz, Ky. et al. A cross-flow centrifugal microfluidic filtration platform to separate serum from whole blood for the detection of amphiphilic biomarkers. Science. representing 111–8 (2021).
Goh, PS, Lau, WJ, Othman, MHD & Ismail, AF Membrane fouling in desalination and its mitigation strategies. Desalination 425130-155 (2018).
Tanis-Kanbur, MB, Velioğlu, S., Tanudjaja, HJ, Hu, X. & Chew, JW Understanding membrane fouling by oil-in-water emulsion via molecular dynamics experiments and simulations. J.Memb. Science. 566140-150 (2018).
Lu, D., Zhang, T., Gutierrez, L., Ma, J. & Croué, JP Influence of the surface properties of the metal oxide of the filtration layer on the fouling of the ceramic membrane during the ultrafiltration of an oil/water emulsion. About. Science. Technology. 504668–4674 (2016).
Zhang, R. et al. Antifouling membranes for sustainable water purification: strategies and mechanisms. Chem. Soc. Round. 455888–5924 (2016).
Ryzhkov, VV et al. Cyclic separation and preconcentration of bacteria on chip. Science. representing ten1–12 (2020).
Debnath, N., Kumar, A., Thundat, T. & Sadrzadeh, M. Investigation of pore-scale fouling using a microfluidic membrane mimic filtration system. Science. representing 91–10 (2019).
De Jong, J., Lammertink, RGH & Wessling, M. Membranes and microfluidics: a review. lab chip 61125-1139 (2006).
Cheng, Y., Ye, X., Ma, Z., Xie, S., and Wang, W. High-throughput, clog-free microfluidic filtration platform for on-chip cell separation of undiluted whole blood. Biomicrofluidics ten(2016).
Van Zwieten, R., Van De Laar, T., Sprakel, J. & Schroën, K. From cooperative to uncorrelated fouling in cross-flow microfluidic membranes. Science. representing 81–10 (2018).
Werber, JR, Osuji, CO & Elimelech, M. Materials for next-generation desalination and water purification membranes. Nat. Rev. Mater. 116018 (2016).
Kota, AK, Kwon, G., Choi, W., Mabry, JM, and Tuteja, A. Hygro-reactive membranes for efficient separation of oil and water. Nat. Common. 31025 (2012).
Miller, DJ, Dreyer, DR, Bielawski, CW, Paul, DR & Freeman, BD Surface modification of water purification membranes. Angelw. Chemistry – Int. Ed. 564662–4711 (2017).
Yalcinkaya, F., Boyraz, E., Maryska, J. & Kucerova, K. A review of membrane technology and surface chemical modification for oily wastewater treatment. Materials (Basel). 13493 (2020).
Jiang, X. et al. Bio-inspired hybrid micro/nanostructure composite membrane with intensified mass transfer and antifouling for membrane distillation in highly saline water. ACS Nano 1417376–17386 (2020).
Wang, Z., Hou, D. & Lin, S. Composite membrane with oleophobic subsea surface for distillation of oil antifouling membrane. About. Science. Technology. 503866–3874 (2016).
Lil. et al. Bio-inspired membrane with adaptable wettability for intelligent oil/water separation. J.Memb. Science. 598117661 (2020).
Liu, H. et al. Sunlight sensitive anti-fouling nanostructured TiO2 Cu-coated mesh for ultra-fast treatment of oily water. Science. representing 625414 (2016).
Li, Z., Zhang, TC, Mokoba, T. & Yuan, S. Superwetting Bi2moo6 /Cu3(PO4)2 Nanosheet coated copper mesh with superior anti-oil fouling and photo-fenton catalytic properties for efficient oil-in-water emulsion separation. ACS Appl. Mater. interfaces 1323662–23674 (2021).
Falcucci, G. et al. Extreme flow simulations reveal skeletal adaptations of deep-sea sponges. Nature 595537–541 (2021).
Fux, G. & Ramon, GZ Micro-scale dynamics of oil droplets on a membrane surface: deformation, reversibility and implications for fouling. About. Science. Technology. 5113842–13849 (2017).
Barambu, NU et al. Membrane surface patterning as a fouling mitigation strategy in liquid filtration: a review. Polymers (Basel). 111–14 (2019).
Goon, GSS, Labban, O., Foo, ZH, Zhao, X. & Lienhard, JH Strain-Induced Cleaning of Organically Fouled Membranes: Fundamentals and Techno-economic Evaluation of Spiral Wound Membranes J.Memb. Science. 626119169 (2021).
Kasai, Y. et al. Breakthrough in Purification of Fossil Pollen for Sediment Dating by New Large Particle Chip Sorter. Science. Adv. seveneabe327 (2021).
Li, H., Aili, A., Alhosani, MH, Ge, Q. & Zhang, T. Directional passive transport of microdroplets in diverging oil-infused channels for efficient condensate removal. ACS Appl. Mater. interfaces ten20910–20919 (2018).
Judd, S. et al. The size and performance of offshore produced water oil extraction technologies for reinjection. Sept. Purif. Technology. 134241–246 (2014).
Lusher, A., Hollman, P. & Mandoza-Hill, J. Microplastics in fisheries and aquaculture. FAO Technical Paper on Fisheries and Aquaculture 615(2017).
Choi, D.C. et al. Effect of pattern shape on the initial deposition of particles in the aqueous phase on patterned membranes during cross-flow filtration. About. Science. Technology. Lett. 466–70 (2017).
Dou, Y. et al. Cross-flow inspired by fish gills for efficient and continuous collection of spilled hydrocarbons. ACS Nano 112477-2485 (2017).
McCloskey, comic et al. A bio-inspired fouling resistant surface modification for water purification membranes. J.Memb. Science. 413–41482–90 (2012).
Divi, RV, Strother, JA & Paig-Tran, EWM Manta rays feed using ricochet separation, a new non-clogging filtration mechanism. Science. Adv. 4eaat9533 (2018).
Sanderson, SL, Roberts, E., Lineburg, J. & Brooks, H. Fish mouths as engineering structures for cross-pitch vortical filtration. Nat. Common. seven1–9 (2016).
Liu, X. et al. 3D printing of bio-inspired liquid super-repellent structures. Adv. Mater. 301800103 (2018).
Li, H., Raza, A., Ge, Q., Lu, JY & Zhang, TJ Enhancing microfluidics through micro-3D printing and solution-based mineral coating. soft material 166841–6849 (2020).
Chowdhury, MR, Steffes, J., Huey, BD & McCutcheon, JR 3D printed polyamide membranes for desalination. Science 361682–686 (2018).
Tijing, LD et al. 3D printing for membrane separation, desalination and water treatment. Appl. Mater. Today 18100486 (2020).
Lee, JY et al. The potential for improving membrane module design through 3D printing technology. J.Memb. Science. 499480–490 (2016).
Sun, C., Fang, N., Wu, DM, and Zhang, X. Projection micro-stereolithography using a digital micro-mirror dynamic mask. Sensors Actuators, A Phys. 121113–120 (2005).
Li, H. & Zhang, T. Imaging and Characterization of Fluid Invasion in Porous Micro-3D Printed Devices with Varying Surface Wettability. soft material 156978–6987 (2019).
Huang, S., Ras, RHA & Tian, X. Antifouling membranes for the treatment of oily wastewater: Interaction between wetting and fouling of membranes. Running. Notice. Sci colloidal interface. 3690-109 (2018).
Hou, X., Hu, Y., Grinthal, A., Khan, M. & Aizenberg, J. Liquid-based trigger mechanism with adjustable multiphase selectivity and antifouling behavior. Nature 51970–73 (2015).